Thursday, April 15, 2021
HomeMobileiPhoneHow to clean your iPhone's charging port?

How to clean your iPhone’s charging port?

There are a few reasons why your iPhone may be having issues with charging. You may have a bad cable or need to restore your software. You may even have to replace your charging port. Some of the time, however, the only problem with your charging port is that it’s hella dirty. Here we will see some few details about how you clean your iPhone charging port.

Products used in How to clean your iPhone charging port

  • Precision tool: GoodCo Flat Bamboo Toothpicks ($7)
  • Softening agent: Perfect Stix – Cotton Balls ($7)
  • Lighting source: SOS Solar Flashlight ($20)

How did charging port get so dirty?

Many of us are having trouble getting iPhone to charge properly. It would charge or uncharge randomly, and sometimes not at all. In the wake of determining that the issue was not a faulty cable, I went straight for the cleaning supplies.

- Advertisement -

The port would have gathered dirt and debris over time. Eventually, a small wall of dirt kept the charging cable from properly engaging with the pins inside the port. Hence, the charging issues.

Before you spend a lot of time and money troubleshooting hardware or software charging issues, give cleaning the link and gunk a shot of your port. There’s a chance that you have all you require comfortable to clear it out.

What you need?

How to clean your iPhone charging port

You may believe that a quick shot with compacted air will get the job done. Perhaps, especially if you’ve only got a slight amount of dust in your charging port, however once in a while, cramming your Lightning cable into the port mashes the gunk in there such a lot of that a spurt of air just doesn’t do the trick. Besides, Apple recommends not utilizing compressed air when cleaning your iPhone, so it’s smarter to keep away from the stuff altogether.

Fortunately, the things you need to clean out your iPhone’s charging port can probably be found lying around the house.

Flashlight 

- Advertisement -

You’ll need great lighting to have the option to see whether you’ve cleaned out the port enough. Indeed, even with a flashlight, it is as yet difficult to see into that tiny hole, yet it helps. I used the flashlight feature on another iPhone since the light is bright and narrowly focused.. It worked extraordinary.

Toothpicks

- Advertisement -

This will be your main cleaning tool. You’ll require a couple in the case you break one. Some people will tell you to utilize a paper clip or straight pin. I don’t recommend shoving anything that hard or sharp into the charging port. Keep in mind, there are little electronic pins in there. You don’t want to scratch or otherwise damage them. A toothpick is more malleable and so less likely to cause damage. In a perfect world, you should utilize flat toothpicks with rounded tips in light of the fact that there is zero sharpness in those.

Cotton

 

It is not a bad idea to have the tiniest bit of cotton on the tip of your toothpick to help cushion the cleaning process. Nonetheless, remember that you may have to actively scrape that port, and a lot of cotton will be unhelpful in such a case.

Patience 

In case you’re lucky, you’ll have all the grime, lint, and gunk cleared out of your iPhone’s charging port with just a couple of quick swipes. However, if you’re at the point where your iPhone isn’t in any event, charging properly anymore it’s probably pretty mucked up, and you’re going to have to spend some time and elbow grease cleaning, and you going to have to spend some time and elbow grease cleaning it out.

How to clean your charging port

At first glance, you might not be able to see the built-up dirt in your port. Indeed, even with a flashlight, it tends to be difficult to see into that tiny chasm. The key is in poking and scraping gently until you’ve dislodged some dirt. Things get simpler after that.

  1. Pay special care when cleaning around the charging pins, so you don’t accidentally damage them. Otherwise, you might end up having to replace the port entirely, which is not a better position to be in.
  2. Power off your iPhone.
  3. If you’re using cotton, place a toothpick on the cotton and twist until it catches and starts to wrap around the toothpick (Only use a small amount).
How to clean your iPhone charging port
  1. Holding your iPhone so the backside is facing up, place the toothpick inside the charging port.
  2. Scrape against the back wall of the port. This will take a lot of poking and scraping. Continue to do this until the debris starts to come loose. You’ll see a bit of gunk come out on the toothpick. Sometimes, you may need to carefully scrape the sides of the port, too. Debris can get lodged behind the spring-loaded anchors. Be careful not to damage the anchors.
  3. Repeat step four until you’re not pulling out any more debris.
How to clean your iPhone charging port

You may need to blow into the port in the middle of scrapings to get some of the loose lint and dirt out of the way.

At the point when you think you’ve cleaned the port out, connect your iPhone to the charging cable again and check whether it worked. If not, repeat the steps above until it works, or until you’ve determined that the issue is anything but a dirty port, at which point, you can go through the troubleshooting steps.

Proper iPhone hygiene

To keep your iPhone in good shape and working order, it’s a smart thought to keep some useful cleaning tools handy; whether it’s for getting out the gunk in your charging port or simply keeping the surface shiny and new, these are the cleaning products you should utilize.

Conclusion

These days we rely on mobile phones for almost everything – shopping, banking, gaming, photography and messaging for instance. But because they are so indispensable, we tend to be very mindful of battery levels. In fact, a study by manufacturer LG discovered that 90% of people experience ‘low battery anxiety’ – a fear that their phone will run out of power before it can be recharged.

Conclusively, how you can clean your charging port-? With a toothpick. One option is to use a tooth pick to gently scrape the inside of the port. Sweep the toothpick around the inside of the port to loosen up any dust, then give the phone a shake to make it fall out.

Read more!

- Advertisement -
Advertisement
Advertisement

Leave a Reply

Advertisement

Latest Blogs

How to use the Touch Bar with the Calendar app on...

0
Calendar, whether Apple's built-in version or a third-party app, is the most basic necessity in today's world. You can add your events, meetings, appointments...
Advertisement

Must Read

Customize and Configure your Apple AirPods now!

1
Apple offers a few options to customize AirPods. You can change various settings, including the name of your AirPods and how each of them responds to your taps. Moreover, you can...

Which streaming music service should you get- Time to choose one!

0
With time, the style of listening to music has changed drastically. The latest trend of music streaming subscription services is taking over individual album purchases. With so many options to choose...

Top Trending And Best Selling Reusable Face Masks in 2020

1
Since the global fear of coronavirus pandemic that began in China and spread worldwide early this year, the world’s reusable mask manufacturers have witnessed a rapid soar in the sales of...
iPad Air 1 Keyboard Cases

iPad Air Keyboard Case-Ultimate alternatives for your typing sessions!

0
You can carry your iPad anywhere and everywhere, but you can't take your PC . But sometimes that so distressing .And of course the keyboard keys are quite more comfortable than...
iPad Mini 360 Case

iPad Mini 360 case- Get your iPad full protection!

1
There is nothing like total protection for your beloved iPad Mini. By now, you would be aware that there are many different types of cases for your iPad Mini. There are...
Advertisement