With moderate to heavy use, the Apple Watch should have a good battery life to last the day. You could even have more than a day out of it if you don’t use it very much! But what happens if your Watch’s battery doesn’t last long enough? The Apple Watch’s battery life has received a lot of criticism over the years, and it is currently one of the few smartwatches with such one-day battery life. If you’re annoyed by the constant need to recharge, you can Extend your Apple Watch’s Battery Life with a few techniques.
The claimed battery life of 18 hours is the same whether you’re sporting a brand-new Series 7, Series SE, or an older model, like the Series 3. There are, however, methods to make a little bit extra. While an Apple Watch’s full charge should last about 18 hours, it frequently stays much less, especially if you often receive messages and alerts, log extensive workouts, or use apps frequently. Nothing is more annoying than seeing a low battery warning after only a short charge, yet it’s pretty much a given if you use your gadget often.
Any Apple Watch model, from the earlier Series 3 to the modern Series 7, can typically last for around 18 hours after a full recharge. The real-time performance you’re likely to receive depends on how you use and configure your Watch, whereas Apple’s estimate is based on 90-time checks, 90 alerts, 45 minutes of app use, and a 60-minute exercise with Bluetooth music. Your mileage may vary dramatically depending on how frequently you use your Watch.
Fortunately, there are certain things you can do to extend your apple watch’s battery life. While none of these techniques are sure to lengthen your battery life significantly, they are among the best available possibilities.
What Will You See Here?
Disable the Always-on Display
Like a traditional wristwatch, the Apple Watch Series 5 or newer features a continuous live display. However, the battery life is drained by the constant display. Except for the SE, Apple Watch Series 5 and subsequent models include an always-on display. This implies that you don’t need to tap the screen or flip your wrist to check the time. This is made feasible by Apple using some cunning strategies to cut battery consumption, such as reducing the display’s refresh rate from 60Hz to just 1Hz. You can turn it off.
- By Navigating to Settings on your Watch.
- Then choose Display & brightness.
- To activate or deactivate the function, tap Always on.
Utilize a Dark Watch Face and Dim the Lights
Your Apple Watch’s display is a tiny OLED LCD with self-emissive technology. Each pixel on an OLED produces its light. On an OLED, you just turn off the pixels to display black. This implies that a watch face with a lot of space for the Apple Watch should consume less power than one with many brilliant whites and solid colors. To determine how much of a difference this makes, run some trials. Use of the Always-On display with a Series 5 or later may result in a noticeable reduction in energy consumption.
The current Watch face may be changed by tapping and holding on to it. You may then choose the one you want by simply scrolling left or right, or you can hit the plus symbol (+) to add a new one. Simply swipe up and pick “Remove” to get rid of a face you no more desire. Follow these steps to find an alternative watch face.
- Swipe left or right to choose the new Watch face you want after tapping and holding the current one to change it.
- Alternatively, tapping the plus symbol (+) may add a new one.
- Hit Add.
- The Simple, Numeral Duo or X-Large faces are the best options for conserving battery life.
Utilize the power-saving mode when exercising
Monitoring your heart rate while doing out is one of the finest functions of the Apple Watch, but not everyone utilizes it. You may disable the heart rate monitor to conserve battery life. Once you’ve done this, your Apple Watch will just track workout-related data like time, distance, and speed.
- Open the Watch app on your iPhone.
- Select “Workout,”
- Then click “Disable Heart Rate Monitoring” to turn the feature off.
- Turn on “Power Saving Mode” on the next page.
Remember that doing this will result in a less precise estimate of your overall number of calories burnt.
Limit the number of notifications you get
Having your Apple Watch’s screen light up with new notifications can drain battery life. You can restrain this by reducing the number of notifications you receive. The battery in your watch might suffer significantly from some notifications, such as mail alerts and social media updates. In addition, you don’t need to receive ten different notifications that your relative liked the Instagram photos you posted of your weekend excursion.
Turning off these notifications may save battery life and stop your Apple Watch from constantly checking for them. You can also turn off the haptic alert and screen illumination. Most third-party apps, including Instagram and Twitter, are configured by default to mimic your iPhone’s notifications. However, by following the guidelines below, you may quickly disable them.
- Using an iPhone, Activate the Watch app.
- Select Notifications from the Mirror iPhone Alerts menu.
- Find the app you want to deactivate by scrolling down from there.
- Turn it off.
Disable the heart-rate monitor
Disable the heart-rate monitor on your watch if you don’t need it to measure your heart rate. While often monitoring your pulse increases calorie counting accuracy, it also consumes a lot of battery life. Every Apple Watch continuously monitors your heart rate. Additionally, starting with the Apple Watch Series 6, they will measure your blood oxygen levels. Batteries power these two features.
- The Apple Watch’s settings are accessible.
- Click Privacy.
- Click Health.
- To disable the option, simply tap Heart rate.
- If the watch’s fitness features are not required, you may disable fitness monitoring by going to Privacy > Motion & fitness > Fitness tracking.
On your Apple Watch, turn off “Hey Siri.”
The excellent hands-free function “Hey Siri” can play music and provide answers to your requests with ease. Your Apple Watch is ready to respond to “Hey Siri” while your watch face is on. That implies that a small amount of extra battery power is used every time you glance at your watch. Try disabling this feature on the watch and sticking with “Hey Siri” on your iPhone to extend the battery life of your Apple Watch.
- Open the settings on your Apple Watch.
- Touch Siri.
- By touching the toggle until it turns grey instead of green, you can turn off Listen for “Hey Siri.”
Why does the Apple Watch battery deplete so quickly?
After an update or regularly, the Apple Watch battery may deplete quickly. This can be caused by mismanaged times, wake screens, too many background programs, or excessive screen brightness. Try making these adjustments to the settings if you want to solve the issue and prevent further harm to your priceless gadget.
Is it possible to swap the battery in the Apple Watch?
For a price, we can repair the battery in the Apple Watch. The warranty does not cover batteries that deteriorate from regular users. If you have AppleCare+ & your product’s battery is less than 80% of its original capacity, your product qualifies for battery servicing at no additional cost.
Is Apple Watch waterproof?
Although it is not waterproof, your Apple Watch is water resistant. You may wear and use your Apple Watch, for instance, while exercising, outside in the rain, and doing the dishes.
Conclusion
The Apple Watch is a high-end watch with exclusive features that costs a lot of money. Its battery life is crucial since it can synchronize many of your essential scheduled plans. The battery life of the Watch is reliable and protracted. It is sufficient to be at your side as you continue your business. However, several methods you may use to extend your Apple Watch’s Battery Life and make it more solid and resilient are covered above, such as turning off certain extra features and using Power Saving and Dark Modes.
